Skip to main content
Megamachines

Identification

Follow these directions after receiving your Peerless Fire Pump to properly identify it.

Nameplate

Each pump has a nameplate which list serial number. The serial number is needed when contacting Peerless Pump with questions or service request.

When a driver is supplied, there will also be a nameplate on the driver. When requesting information about the driver, both the driver serial number and the pump serial number will be required.

Information on the Fire pump nameplate includes the following:

  • pump size/model
  • serial number
  • pump manufacturer and location
  • certification mark (UL/FM fire or other), if any
  • rated flow rate
  • rated speed
  • rated head
  • rated psi
  • impeller diameter

Information on the flange name plate includes the following:

  • pump size/model
  • serial number
  • pump manufacture and location

Certifications

If the product carries an industry certification (UL/FM fire or other), it will be noted on the pump nameplate. Contact Peerless Pump for additional information. 

Pump

The pump size/model is given with a number, letter(s) followed by a number such as 5AEF12. These would represent the size and model of pump.